You must choose whether to seek professional assistance or attempt to install the system yourself if you want to increase the protection of your house with CCTV cameras or a whole CCTV security system. Of course, installing CCTV is expensive. Modern CCTV systems for the home and small business may be purchased with ease from reputable manufacturers like Hikvision, Vale, and Dahua. Therefore, you can save some money on system setup, but you must keep in mind that it could take much longer, particularly if something goes wrong.
Here is a quick and simple guide to CCTV installation.
Select the tools and define your security requirements.
Knowing the type of home security system you intend to install is important since installing a wired or wireless CCTV system will require different installation procedures. Choose wireless CCTV systems if flexibility and simplicity of installation are your top priorities. Such systems, however, typically have lower total bandwidth capacities and are vulnerable to hacking and wireless signal interference. Choose cabled security systems if you want higher quality cameras and more reliable network signals.
Select locations for your cameras, DVR, and NVR.
Keep in mind that shorter cables and more CCTV camera coverage will reduce in-line losses. Choose an inside spot where the majority of entrances are visible when installing cameras there. Additionally, this location must be close to a power outlet. Find a higher place that can capture the window approaches, doors, and garages when placing a camera outside.
Mount your cameras and DVRs.
- Put the camera in the desired location and mark the area for drilling. Make holes and firmly screw the camera into position.
- In a socket, insert the camera’s power cord.
- The DVR/NVR contains all of the recordings made by your CCTV cameras. For this reason, store the DVR/NVR in a locked space to stop a burglar from destroying it.
Connect your cables and monitor
- Consider the camera to DVR communication chain. Nail the mouldings to the wall, then insert the cables inside to protect them.
- You must connect the Cat 6 to the camera in order to use IP cameras. Connect the camera to the video and power cords for an analogue HD setup. Attach the opposite end of the camera cord to the DVR/NVR.
- Connect the hard drive to the DVR/power NVR’s and data line. Turn on the DVR/NVR after plugging it into a power outlet.
- Turn on the DVR or NVR and connect the monitor. There should be as many photos on the split screen as there are cameras.
Test your CCTV system
- Check to ensure if the power supply is turned on and properly connected if you can’t view the photographs.
- Additionally, you can examine BNC connectors and RJ45 connectors (for IP cameras) (analogue cameras).
- Examine any harm if there is still no resolution. Turn on the camera and cable directly in the video test monitor to test the cable and cameras (one by one). The camera is functional if you can see an image on the video test monitor. If the camera doesn’t power on and there isn’t an image, it is broken and needs to be replaced.
It’s important to take care of your home security, and many people choose a reliable CCTV system. Installing a CCTV system may be a pleasant and entertaining process. You might be able to do this using our DIY Hikvision CCTV installation guide and save a tonne of money. However, kindly remember that there are numerous CCTV cameras and complete kits available. Reach out to us for a FREE, no-obligation quote if you don’t have the time to do the necessary research, learn from poor purchases, or deal with poor installation while attempting to get your CCTV system in order. We would be happy to handle this for you.